{"title":"Front bumper","description":"\u003cp\u003eHigh clearance DIY weld-together front bumper kits, designed and manufactured by Coastal Offroad. Every kit ships as precision CNC-cut and bent plate steel that you weld together yourself — winch-ready designs that maximize approach angle without the freight cost of a fully welded bumper.\u003c\/p\u003e","products":[{"product_id":"2nd-gen-dakota-durango-high-clearance-front-bumper-kit","title":"2nd Gen Dakota\/Durango High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 1997-2004 Dodge Dakota and 1998-2003 Dodge Durango. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Dodge Dakota. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 95lbs (steel version) through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Dodge Dakota\/Durango as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Dodge Dakota\/Durango owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires.\u003c\/p\u003e\u003cp\u003eThe center section of this bumper is CNC-bent out of a single piece of  quality 3\/16\" P\u0026amp;O Steel (or 1\/4\" Aluminum). This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. We finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lbs winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Dodge Dakota\/Durango frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Dodge Dakota\/Durango frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Dodge Dakota\/Durango frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 95lbs for the steel bumper and 47lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Dodge Dakota\/Durango is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 6 factory mounting points - NO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your Dodge Dakota\/Durango without a trace that it was ever there. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 5\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (48lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cb\u003e***New Feature: \u003c\/b\u003eFour Integrated LED pod light mounts – slotted and tabbed mounting tabs make for dead-easy alignment and give tons of adjustment to fit a variety of lights (If you would prefer the original design with just the 2 LED light cut outs instead of 4, just let us know and we will make it happen!)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264233328924,"sku":"CO5055","price":819.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_5b16da35-4c07-4a97-9f71-43839028111a.jpg?v=1783513652"},{"product_id":"3rd-gen-dodge-ram-front-winch-bumper-kit","title":"3rd Gen Dodge Ram Front Winch Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 3rd generation (2002-2008) Dodge Ram \u003cb\u003e(Gasoline only)\u003c\/b\u003e.Please visit our Hitch bumper version for Diesel models. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your Ram look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ram. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.\u003c\/p\u003e\u003cp\u003eThis bumper mounts to the inner and outer faces of the vehicle's main frame rails for excellent vehicle protection and pulling strength. This mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible. \u003c\/p\u003e\u003cp\u003eIn addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 4 locations to mount 3x3\" surface mount LED pod lights as well as a center cut out sized to fit all 30\" single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights. \u003c\/p\u003e\u003cp\u003eThe recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFits 1500, 2500 and 3500 Gasoline Dodge Rams from 2002-2008. \u003cb\u003eThis version does not fit the Diesel models due to the large radiators on these models. Please visit our Hitch bumper version for Diesel models\u003c\/b\u003e\u003cstrong\u003e.\u003c\/strong\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e30\" Single Row Light bar cut out - slotted mounting tabs included \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled to mount front license plate \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264233394460,"sku":"CO65359","price":887.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_3b42f827-2f0f-4305-a67a-e74067f94668.jpg?v=1783514094"},{"product_id":"3rd-gen-dodge-ram-front-hitch-bumper-kit","title":"3rd Gen Dodge Ram Front Hitch Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 3rd generation (2002-2008) Dodge Ram (Diesel and Gasoline). It features a low profile design, fully bolt-on construction, integrated 2\" hitch receiver and the best approach angle on the market. The high clearance design makes your Ram look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ram. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.\u003c\/p\u003e\u003cp\u003eThis bumper mounts to the inner and outer faces of the vehicle's main frame rails for excellent vehicle protection and pulling strength. This mounting system distributes impact and hitch forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible. \u003c\/p\u003e\u003cp\u003eIn addition to the front hitch receiver, this bumper comes with 4 locations to mount 3x3\" surface mount LED pod lights as well as a center cut out sized to fit all 30\" single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights. \u003c\/p\u003e\u003cp\u003eThe recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFits 1500, 2500 and 3500 Diesel and Gasoline Dodge Rams from 2002-2008. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 2\" Hitch Receiver provides options for mounting an external winch tray or other hitch accessories \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e30\" Single Row Light bar cut out - slotted mounting tabs included \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled to mount front license plate \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264233427228,"sku":"CO65283","price":957.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f335ca76-18ea-496d-877f-a6f422ee904d.jpg?v=1783514094"},{"product_id":"4th-gen-dodge-ram-1500-front-bumper-kit","title":"4th Gen Dodge Ram 1500 Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 4th generation (2009-2018) Dodge Ram 1500 and (2019-2024) Ram Classic. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. This bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference. It allows you to forget about approach angle and substantially improves the offroad capability of your Ram. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.\u003c\/p\u003e\u003cp\u003eThis bumper uses a total of 8 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eThe optional lower skid plate protects your vulnerable radiator and engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. It has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides. Like the main section of this bumper kit, this skid plate is CNC-folded from a single piece of steel. Just bolt this skid plate onto your Ram and go - no welding required.\u003c\/p\u003e\u003cp\u003eIn addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 4 locations to mount 3x3\" surface mount LED pod lights as well as a center cut out sized to fit all 30\" single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights. The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e\u003cb\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/b\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThis bumper only fits the 2009-2018 4th generation Dodge Ram 1500 and 2019-2024 Dodge Ram 1500 Classic. It DOES NOT fit the 5th generation non-classic Dodge Ram 1500. For the 2019-2024 Ram 1500 Warlock Edition, the correct bumper can be found here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/4th-gen-dodge-ram-1500-warlock-classic-front-bumper-kit-11445#attr=3377,3382,3392,3395,3398,3400,7744\"\u003eRam Warlock Edition\u003c\/a\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty skid plate is CNC-folded from a single piece of metal. No welding required - just bolt it on and go. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e30\" Single Row Light bar cut out - slotted mounting tabs included\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled to mount front license plate\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264233492764,"sku":"CO1634","price":957.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_2f5fc5e4-d3b8-45f2-8d35-ce88588ec798.jpg?v=1783514363"},{"product_id":"4th-gen-dodge-ram-1500-flat-top-front-bumper-kit","title":"4th Gen Dodge Ram 1500 Flat Top Front Bumper Kit","description":"\u003cp\u003eThis is our new Flat Top DIY weld-together bumper kit for the 4th generation (2009-2018) Dodge Ram 1500 and (2019-2024) Ram Classic. It features gives the same great ground clearance as our original high clearance bumper for the 4th gen Ram 1500. However this version uses the factory Ram HD headlight trim pieces (\u003cspan style=\"text-align: inherit; font-size: 13px;\"\u003e55372919AD – driver side; \u003c\/span\u003e\u003cspan style=\"font-size: 13px;\"\u003e55372918AD – passenger side) to achieve a \u003c\/span\u003elower profile flat top design. Like the original, it features fully bolt-on construction, protected winch mount and the best approach angle on the market. This bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference. It allows you to forget about approach angle and substantially improves the offroad capability of your Ram. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis bumper uses a total of 8 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe optional lower skid plate protects your vulnerable radiator and engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. It has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides. Like the main section of this bumper kit, this skid plate is CNC-folded from a single piece of steel. Just bolt this skid plate onto your Ram and go - no welding required.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eIn addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 4 locations to mount 3x3\" surface mount LED pod lights as well as a center cut out sized to fit all 30\" single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights. The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e\u003cspan style=\"font-weight: bolder;\"\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/span\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003efactory Ram HD headlight trim pieces not included and must be purchases separately (\u003cspan style=\"text-align: inherit;\"\u003e55372919AD – driver side; \u003c\/span\u003e55372918AD – passenger side)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThis bumper only fits the 2009-2018 4th generation Dodge Ram 1500 and 2019-2024 Dodge Ram 1500 Classic. It DOES NOT fit the 5th generation non-classic Dodge Ram 1500. For the 2019-2024 Ram 1500 Warlock Edition, the correct bumper can be found here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/4th-gen-dodge-ram-1500-warlock-classic-front-bumper-kit-11445#attr=3377,3382,3392,3395,3398,3400,7744\"\u003eRam Warlock Edition\u003c\/a\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty skid plate is CNC-folded from a single piece of metal. No welding required - just bolt it on and go. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e30\" Single Row Light bar cut out - slotted mounting tabs included\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled to mount front license plate\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264233525532,"sku":"CO13075","price":957.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_19443650-e872-4d87-a321-68ada1d474e0.jpg?v=1783516721"},{"product_id":"4th-gen-dodge-ram-1500-warlock-and-rebel-front-bumper-kit","title":"4th Gen Dodge Ram 1500 Warlock Classic Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 4th generation Dodge Ram 1500 Rebel (2015-2018) and Dodge Ram 1500 Warlock Classic (2019-2024). It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your Ram look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ram. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. This means less stress on your suspension and drivetrain components.\u003c\/p\u003e\u003cp\u003eThis bumper uses a total of 8 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eThe optional lower skid plate protects your vulnerable radiator and engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. It has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides. Like the main section of this bumper kit, this skid plate is CNC-folded from a single piece of steel. Just bolt this skid plate onto your Ram and go - no welding required.\u003c\/p\u003e\u003cp\u003eIn addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 4 locations to mount 3x3\" surface mount LED pod lights as well as a center cut out sized to fit all 30\" single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights. The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThis bumper only fits the 2015-2018 Dodge Ram 1500 Rebel and  2019-2024 Dodge Ram 1500 Warlock Classic. It DOES NOT fit the 5th generation non-classic Dodge Ram 1500. For 2009-2024 Non-warlock 4th gen Ram 1500's and 1500 Classics, the correct bumper can be found here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/4th-gen-dodge-ram-1500-front-bumper-kit-1634#attr=2752,2758,2766,2769,3362,2772,2774,7735\"\u003eNon-Warlock Ram\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty skid plate is CNC-folded from a single piece of metal. No welding required - just bolt it on and go. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e30\" Single Row Light bar cut out - slotted mounting tabs included\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled to mount front license plate\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264233918748,"sku":"CO11445","price":957.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_5f79d88a-a524-4618-ba0c-8d160e861c0f.jpg?v=1783517152"},{"product_id":"1998-2007-ford-courier-high-clearance-front-bumper-kit","title":"1998-2007 Ford Courier High Clearance Front Bumper Kit","description":"\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 1998-2007 Ford Courier, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Ford Courier owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. This bumper uses a total of 8 factory mounting points to solidly mount it to the frame. While this is certainly overkill, this distributes impact and winching forces evenly across your frame and makes for one of the strongest mounting interfaces of any bumper on the market.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" (15mm) thick recovery points that are placed directly in line with the Ford Courier frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Ford Courier frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Ford Courier frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 96 lbs (43.5 kg) for the steel bumper and 47 lbs (21.4 kg) for the aluminum version. Considering that this bumper replaces your factory bumper and associated components 39.6 lbs (18 kg) , the resulting weight increase to your Ford Courier is negligible at best. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp\u003e•NO drilling, cutting or welding of the vehicle required - this bumper can be installed and removed from your 1998-2007 Ford Courier without a trace that it was ever there!\u003c\/p\u003e\u003cp\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 2\" (50mm) from the vehicle body in the center.\u003c\/p\u003e\u003cp\u003e•Fits 4 door and extended cab Models\u003c\/p\u003e\u003cp\u003e•Heavy duty 3\/16\" (5mm) plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e•Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings)\u003c\/p\u003e\u003cp\u003e•Bolts directly to frame using a total of 8 factory mounting points\u003c\/p\u003e\u003cp\u003e•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids (Intercooler relocation required for Intercooler models - detailed instructions provided)\u003c\/p\u003e\u003cp\u003e•Reinforced 9\/16\" (15mm) thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp\u003e•Four integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003cp\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp\u003e•Optional heavy duty grill and headlight tubing hoops for added protection\u003c\/p\u003e\u003cp\u003e•Center-only bumper section is available by special request for those who would like to build their own hybrid tube bumper, please send us an email for more info!\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264236441884,"sku":"CO107317","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_8c1fd107-41d1-4128-99b3-6fdd4f4af18c.jpg?v=1783515138"},{"product_id":"6th-gen-ford-bronco-high-clearance-front-bumper","title":"6th Gen Ford Bronco High Clearance Front Bumper","description":"\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 6th generation 2021+ Ford Bronco as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Bronco owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37+” tires. This bumper uses a total of 8 factory mounting points to solidly mount it to the frame. This distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. This skid plate is mostly CNC-formed into shape and requires very little welding to complete it.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is also CNC-bent out of a single piece of  3\/16″ P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with a 20″ single row light bar mount, two integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16″ recovery points that are placed directly in line with the Ford Bronco frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Ford Bronco frame as part of the bumper’s main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Ford Bronco frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 61.8lbs + 29.9lbs for the steel bumper + skid plate. For the aluminum version, 31lbs + 14.5lbs for the bumper + skid plate. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Ford Bronco is surprisingly minimal. We weighed all of these components removed and found they added up to a total of 43.8lbs! This means that our steel bumper and skid plate only increases your Ford Bronco’s weight by 48lbs and our aluminum version is essentially a wash!  This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp\u003eDon’t want to lose your factory parking sensor system? No problem. This bumper can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located in front of each wheel well.\u003c\/p\u003e\u003cp\u003e•DIY Weld-together kit – This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp\u003e•Available with Factory Parking Sensor Cut outs – (Please email us or put a comment in your order notes section to receive this option)\u003c\/p\u003e\u003cp\u003e• Low profile design is engineered to provide maximum ground clearance and complement the factory body lines – this bumper protrudes less than 4″ from the center of the grill!\u003c\/p\u003e\u003cp\u003e• Heavy duty 3\/16″ plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e• Optional 1\/4″ 5052 aluminum for a lightweight yet very durable overlanding setup\u003c\/p\u003e\u003cp\u003e• Bolts directly to frame using a total of 8 factory mounting points – no drilling required\u003c\/p\u003e\u003cp\u003e•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003cp\u003e•Integrated 9\/16″ thick clevis mounts allow the use of 3\/4″ D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp\u003e•Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights\u003c\/p\u003e\u003cp\u003e•Integrated 20″ Light bar mount – fits all standard 20″ single row light bars and includes adjustable mounts\u003c\/p\u003e\u003cp\u003e• Integrated license plate mount\u003c\/p\u003e\u003cp\u003e• Optional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003cp\u003e•The bumper center section can be ordered on its own by special request if you would like to make your own hybrid tubing side wings (Please email us for details)\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264236474652,"sku":"CO12825","price":787.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_2bdb85f7-a27c-4288-8f64-4e71acefa470.jpg?v=1783516548"},{"product_id":"10th-gen-f-150-high-clearance-front-bumper-kit","title":"10th Gen F-150 High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 10th generation (1997-2003) Ford F-150. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ford F-150. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 96lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 10th generation 1997-2003 Ford F-150 as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Lexus Ford F-150 owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eThis bumper mounts directly to your F-150's frame using a total of 10 factory mounting points. While this is definitely overkill, it ensures that winching and impact forces are distributed as evenly as possible into your frame. We finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Ford F-150 frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Ford F-150 frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Ford F-150 frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 96lbs for the steel bumper and 48lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Ford F-150 is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your Ford F-150 without a trace that it was ever there. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 4\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (48lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264236966172,"sku":"CO5075","price":843.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_79c66106-d21d-4ca0-ac35-fb9e9823d3d9.jpg?v=1783512996"},{"product_id":"12th-gen-f-150-high-clearance-front-bumper-kit","title":"12th Gen F-150 High Clearance Front Bumper Kit","description":"\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 12th generation (2009-2014) Ford F150 as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Ford F150 owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37″ tires. This bumper uses a total of 10 factory mounting points to solidly mount it to the frame. This distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is also CNC-bent out of a single piece of  3\/16″ P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eIn addition to the winch mount that accepts all standard 8000 – 12,000lb winches, this bumper comes with 2 locations to mount 3×3″ surface mount LED pod lights as well as a center cut out sized to fit all 30″ single row light bars. All of these lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights. The heavy duty 9\/16″ thick recovery points are placed directly in line with the Ford F150 frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Ford F150 frame as part of the bumper’s main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Ford F150’s frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 93lbs for the steel bumper and 46lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Ford F150 is surprisingly minimal. We went ahead and weighed all of the factory bumper and recovery point parts that we removed and found that they weigh a total of 64lbs! This means that our steel bumper only adds 29lbs to your F150 and our aluminum bumper actually cuts 18lbs! This reduces stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension without going to stiffer springs.\u003c\/p\u003e\u003cp\u003eDon’t want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill.\u003c\/p\u003e\u003cp\u003e•DIY Weld-together kit – This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003cp\u003e•NO Drilling, cutting or welding of the actual vehicle required – this bumper can be installed and removed from your F150 without a trace that it was ever there.\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines – bumper protrudes less than 2″ from center of grill\u003c\/p\u003e\u003cp\u003e•Heavy duty 3\/16″ plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e•Optional 1\/4″ 5052 aluminum for a lightweight yet very durable overlanding setup (61lb weight savings)\u003c\/p\u003e\u003cp\u003e•Bolts directly to frame using 10 factory mounting points – no drilling required\u003c\/p\u003e\u003cp\u003e•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003cp\u003e•Reinforced 9\/16″ thick clevis mounts allow the use of 3\/4″ D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp\u003e•Two integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003cp\u003e•Integrated 30″ Light bar mount – fits all standard 30″ single row light bars and includes adjustable mounts\u003c\/p\u003e\u003cp\u003e•Optional cut outs to easily swap your factory parking sensors into this new bumper\u003c\/p\u003e\u003cp\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp\u003e•Optional heavy duty grill and headlight tubing hoops for added protection\u003c\/p\u003e\u003cp\u003e•The bumper center section can be ordered on its own by special request if you would like to make your own hybrid tubing side wings (Please email us for details)\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264237031708,"sku":"CO12785","price":879.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_a8109172-1b53-4c98-a52a-8bd0b6d70171.jpg?v=1783515615"},{"product_id":"13th-gen-f-150-high-clearance-front-bumper-kit","title":"13th Gen F-150 High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 13th Gen (2015-2017) Ford F150. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your F150 look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to easily run 35\" tires without any bumper interference. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your F150. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 115lbs (or 57lbs in aluminum) through careful design work. This low weight is especially noteworthy when you consider the weight lost from removing your factory bumper and town hooks - the actual weight difference is minimal and will not have any noticeable affects on your suspension. Build your F150 the right way with true offroad bumpers that maximize its offroad clearance and performance!\u003c\/p\u003e\u003cp\u003eThis bumper uses a total of 12 factory mounting points to solidly mount it to the frame and is available with an optional integrated skid plate for even more protection and strength. The mounting system distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also uses a low profile design that tucks tightly to the body and slopes up directly from the end of the frame. This results in maximum ground clearance and approach angles that will let you take lines on the trail that weren't previously possible. \u003c\/p\u003e\u003cp\u003eThe optional lower skid plate protects your vulnerable radiator, front differential and other lower engine bay parts and provides even more additional ground clearance compared to the flimsy stock skid plate. This skid plate also has side \"wings\" that sit in front of the notoriously exposed and low-hanging front suspension mounts. This will help prevent bent suspension mounts that can throw off your alignment and result in expensive repair bills. As can be seen in the pictures, this skid plate tucks extremely tight to the front end of the vehicle and gives a shocking amount of extra ground clearance where it counts most! Simply put, you will be able to take lines on the trail that previously were not possible with your stock bumper and skid plates. To finish it off, this skid plate has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides. \u003c\/p\u003e\u003cp\u003eIn addition to the winch mount that accepts all standard 8-12,000lb winches, this bumper comes with 2 locations to mount 3x3\" surface mount LED pod lights. These lighting mounts come with slotted mounting tabs that give a ton of adjustability to fit a wide range of different lights.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eNOTE: Does NOT fit 2018-2020 front end.\u003c\/b\u003e At this time, we do not offer a version to fit the 2018-2020 front end style or the factory parking sensor system but please reach out if you'd like to help us make it happen! \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent plates that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your F150 without a trace that it was ever there! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with drop bracket lifts, standard suspension lifts, and body lifts \u003cstrong\u003e(Optional Skid Plate requires modification for drop bracket lifts)\u003c\/strong\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3\" surface mount pod light \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled to mount front license plate \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264237064476,"sku":"CO76313","price":879.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_e3791774-58e9-442b-88ef-4362ac963c86.jpg?v=1783512997"},{"product_id":"2nd-gen-1998-2011-ford-ranger-front-bumper-kit","title":"2nd Gen 1998-2011 Ford Ranger Front Bumper Kit","description":"\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis is a high clearance DIY weld-together winch bumper kit for the 3rd generation (1998-2011) Ford Ranger. It provides recovery points, a protected winch mount, and the best approach angle of any winch bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ranger. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 59lbs (steel version) through careful design work.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 3rd gen Ford Ranger as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Ranger owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. This bumper uses 6 factory mounting points to solidly mount it to the frame - no drilling required. This distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper kit is available with an optional lower skid plate that protects the Ranger's radiator. This skid plate is fully CNC-bent into shape and does not require any welding to complete it.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe center section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis bumper features locations for a 20\" single row light and 2 surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Ranger frame. This eliminates any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Ranger frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Ranger frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 59lbs for the steel bumper and 29lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Ranger is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cb\u003e**This bumper kit will bolt up to the frame of 2nd gen 1993-1997 Ford Ranger models. However it may not line up properly with the body and headlights and may require modification \u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e\u003cspan style=\"font-weight: bolder;\"\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/span\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (29lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 6  factory mounting points - no drilling required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003cb\u003e(On some Ranger models, the center frame bracket must be trimmed in order to fit a winch) \u003c\/b\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 30\" Light bar mount - fits all standard 30\" single row light bars and includes adjustable mounts\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled for license plate\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe bumper center section can be ordered on its own by special request if you would like to make your own hybrid tubing side wings (Please email us for details)\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264237490460,"sku":"CO13064","price":778.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_3bc9d6f1-2d53-4e04-abff-32579f29e223.jpg?v=1783516720"},{"product_id":"2019-ford-ranger-front-bumper-kit","title":"2019+ Ford Ranger Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 2019+ Ford Ranger. It features a low profile design, fully bolt-on construction, protected winch mount and one of the best approach angles on the market. The high clearance design makes your Ranger look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to easily run 35\" tires without any bumper interference. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Ranger. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 94lbs (or 47lbs in aluminum) through careful design work. And unlike many other bumpers on the market, absolutely no modification of the vehicle body or frame is required and the vehicle can be easily returned back to stock if desired. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper as well as the optional skid plate are each CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2019+ Ford Ranger as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Ford Ranger owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. This bumper uses a total of 12 factory mounting points to solidly mount it to the frame (no drilling required). This distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. \u003c\/p\u003e\u003cp\u003eThis bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable radiator and engine bay parts. It also provides even more additional ground clearance compared to the flimsy stock skid plate This skid plate is fully CNC-bent into shape and only requires two very small 1\" long welds to complete it. It has CNC cut outs that improve airflow to the radiator as well as raised sides that stiffen the skid plate and prevent debris from entering the engine bay from the sides. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensors or Adaptive Cruise Control system? No problem. This bumper kit comes with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required. Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points. These recovery points are placed directly in line with the Ford Ranger frame to eliminate any leveraging effects. They are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Ford Ranger frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Ford Ranger frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 94lbs for the steel bumper and 47lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Ford Ranger is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation or slag and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains Factory Parking Sensor System \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompatible with drop bracket lifts, standard suspension lifts, and body lifts. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (47lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3\" surface mount pod light \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled to mount front license plate \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional Adaptive Cruise Control Relocation Bracket -  required for vehicles equipped with Adaptive cruise control system. This CNC bent 2-piece bracket moves the ACC sensor to behind the Ranger's grill and is highly adjustable to tune the sensitivity of the system. Instructions included. (WARNING - sensor should be re-calibrated by a certified Ford technician after installation. Coastal Offroad is not responsible for any death or injury caused by malfunction of this system). \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264237654300,"sku":"CO58505","price":887.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_6ab08fb1-478a-46ab-947e-c4079f59cc5d.jpg?v=1783513451"},{"product_id":"1st-generation-sprinter-front-hitch-bumper-kit","title":"1st Generation Sprinter Front Hitch Bumper Kit","description":"\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis is a high clearance DIY weld-together hitch bumper kit for the 1st generation T1N (1995-2006) Mercedes\/Dodge Sprinter. We took our original  winch bumper and swapped out the winch plate for a built-in hitch receiver. This gives the versatility of a hitch receiver combined with a much slimmer bumper that only protrudes 2.25\" from the grill of the T1N Sprinter.  It features the same unibody-specific mounting system and LED pod light mounts, and gives excellent ground clearance. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Sprinter. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 73lbs through careful design work. The main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eDue to the unibody construction of the Mercedes Sprinter van, there is not a lot to mount a hitch bumper capable of pulling the entire weight of the van. This makes the mounting system of the bumper especially critical. If a thick steel bumper is poorly mounted to the vehicle unibody, no matter how strong the bumper is, it will simply punch through the unibody mounting points should an impact occur. So, our engineers came up with an intermediate crossmember that bolts to your Mercedes Sprinter's main structural rails approximately 18\" back from the nose of the vehicle. This bumper then mounts to this crossmember plus the front of the Mercedes Sprinter's unibody frame using a total of six 1\/2\" bolts. This distributes impact and hitch forces evenly across your unibody frame. As far as we know, this is by far the most serious bumper mounting system available for the first generation Mercedes Sprinter van and will ensure that you can rely on this bumper when you need it most.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eDespite the extra mounting points, this bumper still uses two factory frame mounting points to attach it to the vehicle, meaning that there is absolutely no guess-work required when fitting the bumper to the vehicle. The factory mounting points will locate the bumper perfectly on the vehicle, and then the supplied bumper plates comes pre-cut with the holes to locate the rest of the mounting holes needed. The six 1\/2\" bolts tie the hitch receiver of the bumper directly into the van and our suppled heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard hitch use and recovery point pulls\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a 20\" light bar version), optional grill and headlight protection hoops for increased wildlife protection, and a hitch receiver to allow a variety of recovery and gear carrying options. The heavy duty 9\/16\" thick recovery points are placed directly in line with the T1N Sprinter frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the T1N Sprinter frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your T1N Sprinter frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 73lbs for the steel bumper and 36lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your T1N Sprinter is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design only protrudes 2.25\" front the center of the Sprinter grill - provides maximum ground clearance and complements the factory body lines\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes intermediate mounting crossmember which provides maximum strength for the most demanding offroad conditions\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (37lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eIntegrated 2\" Hitch Receiver provides options for mounting an external winch tray or other hitch accessories\u003c\/span\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238145820,"sku":"CO13071","price":925.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_76b29107-9c7a-4d49-93c7-813dc51f74d0.jpg?v=1783516720"},{"product_id":"1st-generation-mercedes-sprinter-high-clearance-front-bumper-kit","title":"1st Generation Mercedes Sprinter High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 1st generation T1N (1995-2006) Mercedes\/Dodge Sprinter. It features a unibody-specific mounting system, protected winch mount, LED pod light mounts, and excellent ground clearance. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Sprinter. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 88lbs through careful design work. The main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eDue to the unibody construction of the Mercedes Sprinter van, there is not a lot to mount a winch bumper capable of pulling the entire weight of the van. This makes the mounting system of the bumper especially critical. If a thick steel bumper is poorly mounted to the vehicle unibody, no matter how strong the bumper is, it will simply punch through the unibody mounting points should an impact occur. So, our engineers came up with an intermediate crossmember that bolts to your Mercedes Sprinter’s main structural rails approximately 18″ back from the nose of the vehicle. This bumper then mounts to this crossmember plus the front of the Mercedes Sprinter’s unibody frame using a total of six 1\/2″ bolts. This distributes impact and winching forces evenly across your unibody frame. As far as we know, this is by far the most serious winch bumper mounting system available for the first generation Mercedes Sprinter van and will ensure that you can rely on this bumper when you need it most.\u003c\/p\u003e\u003cp\u003eDespite the extra mounting points, this bumper still uses two factory frame mounting points to attach it to the vehicle, meaning that there is absolutely no guess-work required when fitting the bumper to the vehicle. The factory mounting points will locate the bumper perfectly on the vehicle, and then the supplied bumper plates comes pre-cut with the holes to locate the rest of the mounting holes needed. The six 1\/2″ bolts tie the winch plate of the bumper directly into the van and our suppled heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a 20″ light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, optional grill and headlight protection hoops for increased wildlife protection, and optional front hitch receiver to allow a variety of recovery and gear carrying options (available by custom request – please send us an email and we’d be happy to discuss further). The heavy duty 9\/16″ thick recovery points are placed directly in line with the T1N Sprinter frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the T1N Sprinter frame as part of the bumper’s main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your T1N Sprinter frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 88lbs for the steel bumper and 43lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your T1N Sprinter is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp\u003e• DIY Weld-together kit – This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003cbr\u003e• CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003cbr\u003e• Low profile design is engineered to provide maximum ground clearance and complement the factory body lines\u003cbr\u003e• Includes intermediate mounting crossmember which provides maximum strength for the most demanding offroad conditions\u003cbr\u003e• Heavy duty 3\/16″ plate steel construction for maximum offroad strength and durability\u003cbr\u003e• Optional 1\/4″ 5052 aluminum for a lightweight yet very durable overlanding setup (45lb weight savings)\u003cbr\u003e• Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003cbr\u003e• Reinforced 9\/16″ thick clevis mounts allow the use of 3\/4″ D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003cbr\u003e• Four integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights\u003cbr\u003e• Integrated license plate mount\u003cbr\u003e• Optional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238211356,"sku":"CO25619","price":985.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_99fdee84-4301-46bd-ab8f-a8e6109c4881.jpg?v=1783515132"},{"product_id":"2nd-gen-sprinter-high-clearance-front-bumper-kit","title":"2nd Gen Sprinter High Clearance Front Bumper Kit","description":"\u003cp\u003e***We have one brand new welded and powder coated bumper available for purchase. Vancouver, BC pickup only. Please \u003ca href=\"\/contact\"\u003econtact us\u003c\/a\u003e for details.*** This is a high clearance DIY weld-together winch bumper kit for the 2nd gen (2007-2013) Mercedes Sprinter. It features a reinforced bolt-on design, protected winch mount, LED pod light mounts and excellent ground clearance. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Dodge Sprinter. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 105lbs through careful design work. The main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eDue to the construction of the front end of the Mercedes Sprinter van, there are only four tiny M8 factory bolt holes per side available to mount an aftermarket bumper. While this is totally inadequate for an offroad winch bumper, some aftermarket bumpers mount to the Mercedes Sprinter using only these mounting points! If a thick steel bumper is poorly mounted to the vehicle, no matter how strong the bumper is, it will simply fail at its mounting points should an impact or recovery pull occur. Instead, our engineers came up with intermediate mounting brackets that bolt to your Mercedes Sprinter's main structural frame rails approximately 8\" back from the end of the frame. Two 1\/2\" bolts per side get run through the van's frame rails and into these heavy duty brackets. This results in a total of 12 mounting points between this bumper and your Mercedes sprinter van. While this is certainly overkill, it ensures that impact and winching forces are evenly distributed across your Mercedes Sprinter's frame. As far as we know, this is by far the most serious winch bumper mounting system available for the 2nd generation Mercedes Sprinter van and will ensure that you can rely on this bumper when you need it most. \u003c\/p\u003e\u003cp\u003eDespite the extra mounting points, this bumper still uses the factory M8 frame mounting points to attach it to the vehicle as well, meaning that there is absolutely no guess-work required when fitting the bumper to the vehicle. The factory mounting points will locate the bumper perfectly on the vehicle, and then the supplied bumper plates come pre-cut with the holes to locate the rest of the mounting holes needed. The four 1\/2\" bolts tie the winch area of the bumper directly into the vehicle's main frame rails, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. Other notable features include the four integrated LED pod light mounts, optional grill and headlight protection hoops for increased wildlife protection, and optional front hitch receiver to allow a variety of recovery and gear carrying options. \u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2007-2013) Mercedes\/Dodge Sprinter as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Sprinter owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a 20\" or 30\" light bar cut out), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Sprinter frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Sprinter frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Sprinter frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 107lbs for the steel bumper and 55lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Sprinter is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eOther notable features include the optional grill and headlight protection hoops for increased wildlife protection and an optional front hitch receiver to allow a variety of recovery and gear carrying options. (available by custom request - please send us an email and we'd be happy to discuss further). \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes intermediate mounting brackets which provide maximum strength for the most demanding offroad conditions - bumper mounts to frame using a total of 12 mounting points! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (53lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238244124,"sku":"CO7663","price":915.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_eaf7f802-5c50-42e2-b2f0-f994ca15206b.jpg?v=1783514091"},{"product_id":"2nd-generation-dodge-sprinter-high-clearance-front-bumper-kit","title":"2nd Generation Dodge Sprinter High Clearance Front Bumper Kit","description":"\u003cp\u003e***We have one brand new welded and powder coated bumper available for purchase. Vancouver, BC pickup only. Please \u003ca href=\"\/contact\"\u003econtact us\u003c\/a\u003e for details.*** This is a high clearance DIY weld-together winch bumper kit for the 2nd gen (2007-2013) Dodge\/Mercedes Sprinter. It features a reinforced bolt-on design, protected winch mount, LED pod light mounts and excellent ground clearance. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Sprinter. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 105lbs through careful design work. The main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eDue to the construction of the front end of the Dodge Sprinter van, there are only four tiny M8 factory bolt holes per side available to mount an aftermarket bumper. While this is totally inadequate for an offroad winch bumper, some aftermarket bumpers mount to the Dodge Sprinter using only these mounting points! If a thick steel bumper is poorly mounted to the vehicle, no matter how strong the bumper is, it will simply fail at its mounting points should an impact or recovery pull occur. Instead, our engineers came up with intermediate mounting brackets that bolt to your Dodge Sprinter's main structural frame rails approximately 8\" back from the end of the frame. Two 1\/2\" bolts per side get run through the van's frame rails and into these heavy duty brackets. This results in a total of 12 mounting points between this bumper and your Dodge sprinter van. While this is certainly overkill, it ensures that impact and winching forces are evenly distributed across your Dodge Sprinter's frame. As far as we know, this is by far the most serious winch bumper mounting system available for the 2nd generation Dodge Sprinter van and will ensure that you can rely on this bumper when you need it most. \u003c\/p\u003e\u003cp\u003eDespite the extra mounting points, this bumper still uses the factory M8 frame mounting points to attach it to the vehicle as well, meaning that there is absolutely no guess-work required when fitting the bumper to the vehicle. The factory mounting points will locate the bumper perfectly on the vehicle, and then the supplied bumper plates come pre-cut with the holes to locate the rest of the mounting holes needed. The four 1\/2\" bolts tie the winch area of the bumper directly into the vehicle's main frame rails, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. Other notable features include the four integrated LED pod light mounts, optional grill and headlight protection hoops for increased wildlife protection, and optional front hitch receiver to allow a variety of recovery and gear carrying options. \u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2007-2013) Dodge Sprinter as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Sprinter owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a 20\" or 30\" light bar cut out), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Sprinter frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Sprinter frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Sprinter frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 107lbs for the steel bumper and 55lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Sprinter is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eOther notable features include the optional grill and headlight protection hoops for increased wildlife protection and an optional front hitch receiver to allow a variety of recovery and gear carrying options. (available by custom request - please send us an email and we'd be happy to discuss further). \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes intermediate mounting brackets which provide maximum strength for the most demanding offroad conditions - bumper mounts to frame using a total of 12 mounting points! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (53lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238276892,"sku":"CO25233","price":915.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_da0e2866-15b8-4ae8-a200-7496dd24c0a5.jpg?v=1783514091"},{"product_id":"2014-2018-mercedes-sprinter-high-clearance-front-bumper-kit","title":"2014-2018 Mercedes Sprinter High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the post-facelift 2nd gen (2014-2018) Mercedes\/Dodge Sprinter. It features a reinforced bolt-on design, protected winch mount, LED pod and 30\" light bar mounts and excellent ground clearance. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Mercedes\/Dodge Sprinter. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 97lbs through careful design work. Trimming of the factory plastic bumper cover is required, however this is a cosmetic piece that is easily replaceable should you wish to return to the factory front bumper parts in the future. Absolutely no drilling, trimming or modification of the vehicle frame\/chassis is required.\u003c\/p\u003e\u003cp\u003eDue to the construction of the front end of the Mercedes Sprinter van, there are only four tiny M8 factory bolt holes per side available to mount an aftermarket bumper. While this is totally inadequate for an offroad winch bumper, some aftermarket bumpers mount to the Mercedes Sprinter using only these mounting points! If a thick steel bumper is poorly mounted to the vehicle, no matter how strong the bumper is, it will simply fail at its mounting points should an impact or recovery pull occur. Instead, our engineers came up with intermediate mounting brackets that bolt to your Mercedes Sprinter's main structural frame rails approximately 10\" back from the end of the frame. This is done using the six factory M12 mounting points already present on your Sprinter's frame, meaning that this bumper requires absolutely no frame\/chassis cutting, drilling or modification of any kind! The end result is a total of 14 mounting points between this bumper and your Mercedes sprinter van. While this is certainly overkill, it ensures that impact and winching forces are evenly distributed across your Mercedes Sprinter's frame. As far as we know, this is by far the most serious winch bumper mounting system available for the 2014-2018 generation Mercedes Sprinter van and will ensure that you can rely on this bumper when you need it most. \u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2014-2018) Mercedes\/Dodge Sprinter as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most 4x4 Sprinter owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThis bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. This is especially important on the Sprinter chassis, as the factory parts leave your engine oil pan and front differential totally exposed to mud and trail impacts. In fact, the Sprinter van that we had into the shop to design this bumper had this area packed full of dried mud that had to be chipped out! Our skid plate covers this area and is made from heavy duty 3\/16\" steel or 1\/4\" aluminum, ensuring that it can take the heavy trail hits and protect your expensive drivetrain and engine parts. This skid plate is fully CNC-bent into shape out of a single plate of metal and only requires two very small 1\" long welds to complete it. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is also CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel or 1\/4\" aluminum. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with two integrated light buckets for surface mount LED pod lights, a 30\" single row light bar mount (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Sprinter frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Sprinter frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Sprinter frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 97lbs for the steel bumper and 48lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Sprinter is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eOther notable features include the optional grill and headlight protection hoops for increased wildlife protection and an optional front hitch receiver to allow a variety of recovery and gear carrying options. (available by custom request - please send us an email and we'd be happy to discuss further). \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTrimming of the factory plastic bumper cover is required (detailed trimming instructions included), however absolutely no drilling trimming or modification of the vehicle frame\/chassis is required. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes intermediate mounting brackets which provide maximum strength for the most demanding offroad conditions - bumper mounts to frame using a total of 14 factory mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 30″ Light bar mount – fits all standard 30″ single row light bars and includes adjustable mounts \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238309660,"sku":"CO92109","price":940.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_7dd8fcf9-c4af-47c1-b05c-a7e15f35afd3.jpg?v=1783513450"},{"product_id":"2014-2018-dodge-sprinter-high-clearance-front-bumper-kit","title":"2014-2018 Dodge Sprinter High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the post-facelift 2nd gen (2014-2018) Mercedes\/Dodge Sprinter. It features a reinforced bolt-on design, protected winch mount, LED pod and 30\" light bar mounts and excellent ground clearance. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Mercedes\/Dodge Sprinter. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 97lbs through careful design work. Trimming of the factory plastic bumper cover is required, however this is a cosmetic piece that is easily replaceable should you wish to return to the factory front bumper parts in the future. Absolutely no drilling, trimming or modification of the vehicle frame\/chassis is required.\u003c\/p\u003e\u003cp\u003eDue to the construction of the front end of the Mercedes Sprinter van, there are only four tiny M8 factory bolt holes per side available to mount an aftermarket bumper. While this is totally inadequate for an offroad winch bumper, some aftermarket bumpers mount to the Mercedes Sprinter using only these mounting points! If a thick steel bumper is poorly mounted to the vehicle, no matter how strong the bumper is, it will simply fail at its mounting points should an impact or recovery pull occur. Instead, our engineers came up with intermediate mounting brackets that bolt to your Mercedes Sprinter's main structural frame rails approximately 10\" back from the end of the frame. This is done using the six factory M12 mounting points already present on your Sprinter's frame, meaning that this bumper requires absolutely no frame\/chassis cutting, drilling or modification of any kind! The end result is a total of 14 mounting points between this bumper and your Mercedes sprinter van. While this is certainly overkill, it ensures that impact and winching forces are evenly distributed across your Mercedes Sprinter's frame. As far as we know, this is by far the most serious winch bumper mounting system available for the 2014-2018 generation Mercedes Sprinter van and will ensure that you can rely on this bumper when you need it most. \u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2014-2018) Mercedes\/Dodge Sprinter as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most 4x4 Sprinter owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThis bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. This is especially important on the Sprinter chassis, as the factory parts leave your engine oil pan and front differential totally exposed to mud and trail impacts. In fact, the Sprinter van that we had into the shop to design this bumper had this area packed full of dried mud that had to be chipped out! Our skid plate covers this area and is made from heavy duty 3\/16\" steel or 1\/4\" aluminum, ensuring that it can take the heavy trail hits and protect your expensive drivetrain and engine parts. This skid plate is fully CNC-bent into shape out of a single plate of metal and only requires two very small 1\" long welds to complete it. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is also CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel or 1\/4\" aluminum. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with two integrated light buckets for surface mount LED pod lights, a 30\" single row light bar mount (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Sprinter frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Sprinter frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Sprinter frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 97lbs for the steel bumper and 48lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Sprinter is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eOther notable features include the optional grill and headlight protection hoops for increased wildlife protection and an optional front hitch receiver to allow a variety of recovery and gear carrying options. (available by custom request - please send us an email and we'd be happy to discuss further). \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTrimming of the factory plastic bumper cover is required (detailed trimming instructions included), however absolutely no drilling trimming or modification of the vehicle frame\/chassis is required. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes intermediate mounting brackets which provide maximum strength for the most demanding offroad conditions - bumper mounts to frame using a total of 14 factory mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 30″ Light bar mount – fits all standard 30″ single row light bars and includes adjustable mounts \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238539036,"sku":"CO92186","price":940.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_808e962e-ab81-449e-a2f6-b482889f308e.jpg?v=1783513450"},{"product_id":"2nd-gen-suzuki-vitara-high-clearance-front-bumper-kit","title":"2nd Gen Suzuki Vitara High Clearance Front Bumper Kit","description":"\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: inherit; font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003eThis is a high clearance DIY weld-together winch bumper kit for the 1999-2005 Suzuki Vitara (2nd gen). It features a bolt-on design, protected winch mount, LED pod light mounts and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your \u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eVitara\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: inherit; font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 74lbs (steel version) through careful design work.\u003c\/span\u003e\u003cbr\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Vitara as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Vitara owners want to run oversized tires along with long arm suspension kits that extend the wheelbase of the vehicle. This moves the front tires further forwards and often creates interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to clear 33\" tires with a long arm suspension kit.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches, and heavy duty 9\/16\" recovery points that are placed directly in line with the Vitara frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Vitara frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Vitara's frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 74lbs for the steel bumper and 36lbs for the aluminum version. Considering that this bumper replaces your factory bumper cover and steel inner-bumper bar, the resulting weight increase to your Suzuki is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp class=\"p1\"\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Heavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (38lb weight savings)\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Bolts directly to frame using 4 heavy duty 1\/2\" mounting points\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Protected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models)\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Reinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Optional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003ccode\u003e\u003c\/code\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238604572,"sku":"CO23241","price":785.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_2015c28b-8223-4e7b-a939-faca432b47bd.jpg?v=1783513655"},{"product_id":"suzuki-grand-vitara-xl-7-high-clearance-front-bumper-kit","title":"Suzuki Grand Vitara XL-7 High Clearance Front Bumper Kit","description":"\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: inherit; font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003eThis is a high clearance DIY weld-together bumper kit for the 1999-2006 Suzuki Grand Vitara XL7. It features a low profile design, fully bolt-on construction, protected winch mount and the best approach angle on the market. The high clearance design makes your XL7 look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 33\"+ tires without any bumper interference! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Suzuki XL-7. It offers excellent protection from rocks, trees and animal strikes and has been kept to a very reasonable weight of 74lbs (or 36lbs in aluminum) through careful design work.\u003c\/span\u003e\u003cbr\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Suzuki Vitara as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Suzuki Vitara owners want to run oversized tires along with long arm suspension kits that extend the wheelbase of the vehicle. This moves the front tires further forwards and often creates interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to clear 33\" tires with a long arm suspension kit.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Suzuki Vitara frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Suzuki Vitara frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Vitara's frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 74lbs for the steel bumper and 36lbs for the aluminum version. Considering that this bumper replaces your factory bumper cover and steel inner-bumper bar, the resulting weight increase to your Vitara is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp class=\"p1\"\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003cp class=\"p1\"\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Heavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (38lb weight savings)\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Bolts directly to frame using 4 heavy duty 1\/2\" mounting points\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Protected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models)\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Reinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp\u003e\u003ccode\u003e\u003c\/code\u003e\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Optional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238637340,"sku":"CO122555","price":785.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_93d47d8a-cef6-4451-8d6a-c73558a11fd5.jpg?v=1783515612"},{"product_id":"mitsubishi-l400-series-1-delica-high-clearance-front-bumper-kit","title":"Mitsubishi L400 Series 1 Delica High Clearance Front Bumper Kit","description":"\u003cp\u003e    This is a high clearance DIY weld-together winch bumper kit for the L400 Series 1 (1994- March,1997) Mitsubishi Delica. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Delica. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 106lbs through careful design work. Especially after factoring in the weight loss of removing your factory bumper and associated components, this bumper will not add a significant amount of weight to your Delica and can even be installed with the stock suspension! However, make no mistake - This bumper has been designed with hard offroad driving in mind and can take a serious beating without skipping a beat.\u003c\/p\u003e\u003cp\u003eDue to the Delica van's unibody construction, the design of the mounting system is especially critical. If a thick steel bumper is poorly mounted to the vehicle unibody, no matter how strong the bumper is, it will simply punch through the unibody mounting points should an impact occur. Our mounting system uses a total of 10 bolts to spread forces evenly through the Delica's thin unibody frame structure, which substantially stiffens the bumper and protects the mounting interfaces. \u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Mitsubishi Delica as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Mitsubishi Delica owners want to run oversized tires. We have thought ahead and specifically designed these bumper side wings to clear larger tires with ease. This bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16″ P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches, and heavy duty 3\/8\" recovery points that are placed directly in line with the frame mounting points to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Delica's unibody frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Delica's delicate unibody frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 106lbs for the steel bumper and 52lbs for the aluminum version. Considering that this bumper replaces your factory bumper cover and steel inner-bumper bar, the resulting weight increase to your Mitsubishi Delica is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (54lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to unibody frame using a total of 10 mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 3\/8\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated turn signal cut outs \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238866716,"sku":"CO14993","price":903.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_9fa27940-422a-44b7-8ddc-5dde72c86dd3.jpg?v=1783514592"},{"product_id":"mitsubishi-l400-series-2-delica-high-clearance-front-bumper-kit","title":"Mitsubishi L400 Series 2 Delica High Clearance Front Bumper Kit","description":"\u003cp\u003e    This is a high clearance DIY weld-together winch bumper kit for the L400 Series 2 (1998-2004) Mitsubishi Delica. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Delica. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 88lbs through careful design work. Especially after factoring in the weight loss of removing your factory bumper and associated components, this bumper will not add a significant amount of weight to your Delica and can even be installed with the stock suspension! However, make no mistake - This bumper has been designed with hard offroad driving in mind and can take a serious beating without skipping a beat.\u003c\/p\u003e\u003cp\u003e    Due to the Delica van's unibody construction, the design of the mounting system is especially critical. If a thick steel bumper is poorly mounted to the vehicle unibody, no matter how strong the bumper is, it will simply punch through the unibody mounting points should an impact occur. Our mounting system uses a total of 10 bolts to spread forces evenly through the Delica's thin unibody frame structure, which substantially stiffens the bumper and protects the mounting interfaces. \u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Mitsubishi Delica as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Mitsubishi Delica owners want to run oversized tires. We have thought ahead and specifically designed these bumper side wings to clear larger tires with ease. This bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches, and heavy duty 3\/8\" recovery points that are placed directly in line with the frame mounting points to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Delica's unibody frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Delica's delicate unibody frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 88lbs for the steel bumper and 43lbs for the aluminum version. Considering that this bumper replaces your factory bumper cover and steel inner-bumper bar, the resulting weight increase to your Mitsubishi Delica is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (45lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to unibody frame using a total of 10 mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 3\/8\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated turn signal cut outs \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238899484,"sku":"CO0677","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_ac5b9dce-7417-4184-8a22-5f961e36c100.jpg?v=1783514593"},{"product_id":"2nd-gen-chevrolet-tracker-high-clearance-front-bumper-kit","title":"2nd Gen Chevrolet Tracker High Clearance Front Bumper Kit","description":"\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: inherit; font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003eThis is a high clearance DIY weld-together winch bumper kit for the 1999-2005 Chevrolet Tracker (2nd gen). It features a bolt-on design, protected winch mount, LED pod light mounts and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Chevrolet Tracker. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 74lbs (steel version) through careful design work.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Tracker as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Tracker owners want to run oversized tires along with long arm suspension kits that extend the wheelbase of the vehicle. This moves the front tires further forwards and often creates interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to clear 33\" tires with a long arm suspension kit.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tracker frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Tracker frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tracker's frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 74lbs for the steel bumper and 36lbs for the aluminum version. Considering that this bumper replaces your factory bumper cover and steel inner-bumper bar, the resulting weight increase to your Tracker is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp class=\"p1\"\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Heavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (38lb weight savings)\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Bolts directly to frame using 4 heavy duty 1\/2\" mounting points\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Protected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits some 12,000lb models)\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Reinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit just about any 3x3 surface mount pod light\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Optional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003ccode\u003e\u003c\/code\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264238965020,"sku":"CO9129","price":785.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f4865fce-68ab-4f94-b207-9f47a1a8d4d4.jpg?v=1783513652"},{"product_id":"2nd-gen-chrevrolet-colorado-gmc-canyon-high-clearance-front-bumper-kit","title":"2nd Gen Chrevrolet Colorado \/ GMC Canyon High Clearance Front Bumper Kit","description":"\u003cp class=\"p1\"\u003eThis is a high clearance DIY weld-together winch bumper kit for the 2nd generation (2015-2020) Chevrolet Colorado ZR2. It features a bolt-on design, protected winch mount, and the best approach angle of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Colorado ZR2. It's heavy duty 3\/16\" steel construction offers excellent protection from rocks, trees and animal strikes while careful design work has resulted in a bumper that only weighs 91lbs. After removing the stock bumper and associated parts (26lbs), this bumper in steel only adds 65lbs to your Colorado ZR2!\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2017-2020) Chevrolet Colorado ZR2 as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Colorado and ZR2 owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. This bumper uses a total of 15 factory mounting points to solidly mount it to the frame. While this is certainly overkill, it distributes impact and winching forces evenly across your vehicle frame and makes for the stiffest mounting interface of any bumper on the market. This bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. This skid plate is fully CNC-bent into shape and only requires two very small 1\" long welds to complete it.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is also CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with a 20\" single row light bar mount, two integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Chevrolet Colorado frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Chevrolet Colorado frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Chevrolet Colorado frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 91lbs for the steel bumper and 45lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Chevrolet Colorado is surprisingly minimal. In fact, if you look at the last picture on this page, you can see the amount of factory plastic and other parts that get removed. We weighed all of these components and found they added up to a total of 26lbs + 13lbs for the skid plate. This means that our steel bumper only increases your Chevrolet Colorado's weight by 65lbs and our aluminum bumper only increases it by 19lbs!  This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp\u003e•Maintains part of the factory plastic bumper for reduced weight and cleaner lines. Trimming of factory plastic bumper is required but we provide a very detailed and beginner-friendly guide on making this cut trouble-free.\u003c\/p\u003e\u003cp\u003e•Bolts directly to frame using a total of 15 factory mounting points. NO Drilling, cutting or welding of the actual vehicle frame required - this bumper can be installed and removed from your Colorado ZR2 frame without a trace that it was ever there!\u003c\/p\u003e\u003cp\u003e•Available with Factory Parking Sensor Cut outs - (Please email us or put a comment in your order notes section to receive this option)\u003c\/p\u003e\u003cp\u003e• Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill, giving it a very form-fitting factory appearance on the vehicle\u003c\/p\u003e\u003cp\u003e• Heavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e• Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (46lb weight savings)\u003c\/p\u003e\u003cp\u003e•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003cp\u003e•Integrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp\u003e•Two Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights\u003c\/p\u003e\u003cp\u003e•Integrated 20\" Light bar mount - fits all standard 20\" single row light bars and includes adjustable mounts\u003c\/p\u003e\u003cp\u003e• Integrated license plate mount\u003c\/p\u003e\u003cp\u003e• Optional heavy duty 0.120\" wall  grill and headlight tubing for added protection\u003c\/p\u003e\u003cp\u003e•The bumper center section in the last picture can be ordered on its own by special request if you would like to make your own hybrid tubing side wings (Please email us for details)\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264239030556,"sku":"CO101123","price":861.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f33998ab-383b-4e9e-ade0-e98ad565c76d.jpg?v=1783515134"},{"product_id":"lexus-gx470-high-clearance-front-bumper-kit","title":"Lexus GX470 High Clearance Front Bumper Kit","description":"\u003cp\u003e    This is a high clearance DIY weld-together winch bumper kit for the 2003-2009 Lexus GX470. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your GX470. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a weight of 115lbs through careful design work. This weight is especially noteworthy considering that this bumper provides coverage from the bottom of the headlights down to the front frame crossmember where the factory skid plate starts. This means that no trimming of the factory bumper is required and that you get full uninterrupted protection for the front end of your GX when paired with either the stock or aftermarket skid plates.\u003c\/p\u003e\u003cp\u003e    The profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the (2003-2009) Lexus GX470 as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Lexus GX470 owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Lexus GX470 frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Lexus GX470 frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Lexus GX470 frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 115lbs for the steel bumper and 57lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Lexus GX470 is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your GX470 without a trace that it was ever there. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 14 factory mounting points - no drilling required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264239096092,"sku":"CO0418","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f05decb8-c712-4b61-8cca-cacbb9ff0464.jpg?v=1783514591"},{"product_id":"lexus-gx460-high-clearance-front-bumper-kit","title":"Lexus GX460 High Clearance Front Bumper Kit","description":"\u003cp\u003e    This is a high clearance DIY weld-together bumper kit for the 2010-2013 Lexus GX460. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your GX460. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 121lbs (steel version) through careful design work. This weight is especially noteworthy considering that this bumper provides full coverage from the bottom of the headlights down to the front frame crossmember where the factory skid plate starts. This means that no trimming of the factory bumper is required and that you get full uninterrupted protection for the front end of your GX when paired with either stock or aftermarket skid plates. This bumper will not fit the 2014-2020 GX460 front end but we plan to offer a dedicated 2014 version in 2022!\u003c\/p\u003e\u003cp\u003e    The profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Lexus GX460 as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Lexus GX460 owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Lexus GX460 frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Lexus GX460 frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Lexus GX460 frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 121lbs for the steel bumper and 60lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Lexus GX460 is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit comes with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required. Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness, thus maintaining all of the factory switches on your steering column. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your GX460 without a trace that it was ever there. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains Factory Parking Sensors \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (61lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264240111900,"sku":"CO8089","price":985.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_7fefca87-3807-438d-95b0-ba723adc6015.jpg?v=1783514590"},{"product_id":"6th-gen-corolla-all-trac-ae95","title":"6th Gen Corolla All Trac AE95","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 6th Gen Corolla All Trac AE95. It fits 1988-1994 models and features a bolt-on design, protected winch mount, and an excellent approach angle. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Corolla! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 45.5lbs through careful design work. Absolutely no modification of the vehicle chassis is required and the vehicle can be easily returned back to stock if desired.\u003c\/p\u003e\u003cp\u003eDue to the unibody construction of the AE95 Corolla, there is not a lot to mount a winch bumper capable of pulling the entire weight of the vehicle. This makes the mounting system of the bumper especially critical. If a thick steel bumper is poorly mounted to the vehicle unibody, no matter how strong the bumper is, it will simply punch through the unibody mounting points should an impact occur. So, our engineers came up with a mounting system that distributes impact and winching forces evenly across your unibody frame. As far as we know, this is by far the most serious winch bumper mounting system available for the 6th gen Corolla and will ensure that you can rely on this bumper when you need it most.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the AE95 Corolla as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most AE95 owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and designed these bumper side wings to easily clear 30\"+ tires.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept a 4500lb atv\/utv winch (4.88x3\" bolt pattern), and heavy duty 9\/16\" thick recovery points. These recover points are placed directly in line with the main mounting points of the Corolla unibody to eliminate any leveraging effects. They are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Corolla chassis as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Corolla's chassis and are essentially indestructible! Yes its overkill for the weight of the Corolla, but we wanted to keep in mind that most other offroad rigs you encounter on the trail are heavier than you are. And if you need to pull someone else out, the last thing you want is sub-par recovery points that will fail under the weight of a stuck SUV or truck. \u003c\/p\u003e\u003cp\u003e What could make this bumper even better? The low profile design has resulted in very reasonable weights of 45.5lbs for the steel bumper and 24.3lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Corolla is actually quite minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired - no need to go stiffer. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHardware Included\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your Corolla without a trace that it was ever there!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes only 3\" from center of grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1\/8\" plate steel construction for offroad strength and durability while keeping weight in mind\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 3\/16\" 5052 aluminum for a lightweight yet very durable overlanding setup (21.2lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to vehicle unibody using 6 large M12 factory mounting points - no drilling required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the unibody mounting points for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing hoops for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264240308508,"sku":"CO13025","price":657.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_d9d9257f-3ae8-421a-9467-f38022613943.jpg?v=1783516719"},{"product_id":"fj-cruiser-high-clearance-front-bumper-kit","title":"FJ Cruiser High Clearance Front Bumper Kit","description":"\u003cp\u003e    This is a high clearance DIY weld-together front bumper kit for the 2006-2014 Toyota FJ Cruiser. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your FJ. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 76lbs through careful design work.\u003c\/p\u003e\u003cp\u003e    The profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the Toyota FJ Cruiser as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most FJ Cruiser owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the FJ Cruiser frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the FJ Cruiser frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your FJ Cruiser frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 76lbs for the steel bumper and 37lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your FJ Cruiser is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut  and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your GX460 without a trace that it was ever there. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 5\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (39lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - NO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your FJ Cruiser without a trace that it was ever there. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264240341276,"sku":"CO4892","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_3fce80f2-6303-42ef-8ebb-d3c87929d452.jpg?v=1783514588"},{"product_id":"6th-gen-hilux-high-clearance-front-bumper-kit","title":"6th Gen Hilux High Clearance Front Bumper Kit","description":"\u003cp class=\"p1\"\u003eThis is a high clearance DIY weld-together winch bumper kit for the 6th Generation 1997-2004 Toyota Hilux. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your 6th gen Toyota Hilux! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 72lbs through careful design work. And unlike many other bumpers on the market, absolutely no modification of the vehicle frame is required and the vehicle can be easily returned back to stock if desired.\u003c\/p\u003e\u003cp class=\"p1\"\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" (5mm) P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp class=\"p1\"\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 6th Generation 1997-2004 Toyota Hilux, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Toyota Hilux owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. This bumper uses a total of 10 factory mounting points to solidly mount it to the frame. While this is certainly overkill, this distributes impact and winching forces evenly across your frame and makes for one of the strongest mounting interfaces of any bumper on the market.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" (15mm) thick recovery points that are placed directly in line with the 6th gen Toyota Hilux frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Toyota Hilux frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Hilux frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 81.6 lbs (37.1 kg) for the steel bumper and 40.3 lbs (18.3 kg) for the aluminum version. Considering that this bumper replaces your factory bumper and associated components (23.1lbs (10.5kg)), the resulting weight increase to your Toyota Hilux is negligible at best. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp\u003e\u003cb\u003e•***Important Fitment Note:\u003c\/b\u003e The 2001-2004 version is shown. There is some variance in the year split vs front end style depending on the market of origin of your Hilux. If you have a 2001-2004 truck but your front end is different than shown, please include a picture of your Hilux and we will verify fitment before sending. \u003c\/p\u003e\u003cp\u003e•NO drilling, cutting or welding of the vehicle required - this bumper can be installed and removed from your 6th Generation 1997-2004 Toyota Hilux without a trace that it was ever there!\u003c\/p\u003e\u003cp\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 4\" (100mm) from the vehicle body in the center.\u003c\/p\u003e\u003cp\u003e•Fits 4 door and extended cab Models\u003c\/p\u003e\u003cp\u003e•Heavy duty 3\/16\" (5mm) plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e•Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (41.3lb weight savings)\u003c\/p\u003e\u003cp\u003e•Bolts directly to frame using a total of 10 factory mounting points\u003c\/p\u003e\u003cp\u003e•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003cp\u003e•Reinforced 9\/16\" (15mm) thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp\u003e•Four integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003cp\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp\u003e•Optional heavy duty grill and headlight tubing hoops for added protection\u003c\/p\u003e\u003cp\u003e•Center-only bumper section is available by special request for those who would like to build their own hybrid tube bumper, please send us an email for more info!\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264240472348,"sku":"CO107333","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_c31c0e97-1fea-4a7e-8f03-a1e74891d21e.jpg?v=1783515134"},{"product_id":"7th-gen-hilux-high-clearance-front-bumper-kit","title":"7th Gen Hilux High Clearance Front Bumper Kit","description":"\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 7th Generation 2005-2015 Toyota Hilux, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Toyota Hilux owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. This bumper uses a total of 16 factory mounting points to solidly mount it to the frame. While this is certainly overkill, this distributes impact and winching forces evenly across your frame and makes for one of the strongest mounting interfaces of any bumper on the market. This bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. This skid plate is fully CNC-bent into shape and only requires two very small spot welds to complete it.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" (15mm) thick recovery points that are placed directly in line with the 7th gen Toyota Hilux frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Toyota Hilux frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Hilux frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 89.6 lbs (40.7 kg) for the steel bumper and 44.2 lbs (20.1 kg) for the aluminum version. Considering that this bumper replaces your factory bumper and associated components (24.2lbs (11 kg)), the resulting weight increase to your Toyota Hilux is negligible at best. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp\u003e•NO modification or welding of the actual vehicle frame required - this bumper can be installed and removed from your 7th Generation 2005-2015 Toyota Hilux without a trace that it was ever there!\u003c\/p\u003e\u003cp\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 2\" (50mm) from the vehicle body in the center.\u003c\/p\u003e\u003cp\u003e•Maintains part of the factory plastic bumper for reduced weight and cleaner lines. Trimming of factory plastic bumper is required but we provide a very detailed and beginner-friendly guide on making this cut trouble-free.\u003c\/p\u003e\u003cp\u003e•Fits 4 door and extended cab Models\u003c\/p\u003e\u003cp\u003e•Heavy duty 3\/16\" (5mm) plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e•Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (45.4lb weight savings)\u003c\/p\u003e\u003cp\u003e•Bolts directly to frame using a total of 16 factory mounting points\u003c\/p\u003e\u003cp\u003e•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003cp\u003e•Reinforced 9\/16\" (15mm) thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp\u003e•Four integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003cp\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp\u003e•Optional heavy duty grill and headlight tubing hoops for added protection\u003c\/p\u003e\u003cp\u003e•Center-only bumper section is available by special request for those who would like to build their own hybrid tube bumper, please send us an email for more info!\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264240570652,"sku":"CO107388","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_dfa94ba4-5d09-453e-9b88-1bf0c0a8010d.jpg?v=1783515135"},{"product_id":"70-series-land-cruiser-high-clearance-front-bumper-kit","title":"70 Series Land Cruiser High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 70 Series Toyota Land Cruiser. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Land Cruiser! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 66lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 70 Series Toyota Land Cruiser as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Land Cruiser owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Land Cruiser frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Land Cruiser frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Land Cruiser frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 66lbs for the steel bumper and 32lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Land Cruiser is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003e\u003cb\u003eNOTE:\u003c\/b\u003e Due to the number of variations and sub models of the 70-Series Land Cruiser, please email us a picture and the exact model of your Cruiser when placing your order so we can confirm fitment \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 4\" from center of grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (34lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing with CNC base gussets for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264240865564,"sku":"CO0930","price":757.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_dfd2943c-749f-4019-a7f3-d8517e097c4f.jpg?v=1783514586"},{"product_id":"70-series-land-cruiser-high-cut-front-bumper-kit","title":"70 Series Land Cruiser High Cut Front Bumper Kit","description":"\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis is our new high cut front bumper version for the 70 Series Land Cruiser. We took our original high clearance bumper design and raised it up by over 5\" for an aggressive look and even more front end ground clearance. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Land Cruiser! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 68lbs through careful design work.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 70 Series Toyota Land Cruiser as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Land Cruiser owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWe finished this bumper off with an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Land Cruiser frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Land Cruiser frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Land Cruiser frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 68lbs for the steel bumper and 34lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Land Cruiser is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cspan style=\"font-weight: bolder;\"\u003eIMPORTANT NOTE:\u003c\/span\u003e This bumper kit will only fit the 70 Series front end style shown on this page. Due to the number of variations and sub models of the 70-Series Land Cruiser, please email us a picture and the exact model of your Cruiser when placing your order so we can confirm fitment\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cb\u003eValence and Fender Flare Trimming Required for Install\u003c\/b\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 4\" from center of grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (34lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing with CNC base gussets for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264240931100,"sku":"CO13074","price":757.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_cb72bb62-2eb0-4229-bb8d-7fcc8f42da1f.jpg?v=1783516721"},{"product_id":"80-series-land-cruiser-high-clearance-front-bumper-kit","title":"80 Series Land Cruiser High Clearance Front Bumper Kit","description":"\u003cp\u003e    This is a high clearance DIY weld-together winch bumper kit for the 80 Series Toyota Land Cruiser. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Land Cruiser! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 72lbs through careful design work. And unlike many other bumpers on the market, absolutely no modification of the vehicle body or frame is required and the vehicle can be easily returned back to stock if desired. \u003cbr\u003e    The main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 80 Series Land Cruiser as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Land Cruiser owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Land Cruiser frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and bolt directly to the Land Cruiser frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Land Cruiser frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 72lbs for the steel bumper and 35lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Land Cruiser is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - this bumper can be installed and removed from your Land Cruiser without a trace that it was ever there! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes only 3\" from center of grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (37lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing hoops for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCenter-only bumper shown in some of the photos is available by special request, please send us an email for more info!\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241029404,"sku":"CO13108","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_3c737a32-5461-48f9-bfaa-020d63211a18.jpg?v=1783514587"},{"product_id":"90-series-land-cruiser-high-clearance-front-bumper-kit","title":"90 Series Land Cruiser High Clearance Front Bumper Kit","description":"\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 90 Series Land Cruiser Prado (1996-2002) as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Land Cruiser owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires.\u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the 90 Series frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the 90 Series frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your 90 Series frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 86lbs for the steel bumper and 42lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your 90 Series is minimal (55lbs for steel bumper, 11lbs for aluminum bumper). This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp class=\"p1\"\u003e\u003cstrong\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together\u003c\/strong\u003e (detailed assembly instructions included)\u003c\/p\u003e\u003cp\u003e•CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003cp\u003e• Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 4\" from the center of the grill!\u003c\/p\u003e\u003cp\u003e• Heavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e• Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (44lb weight savings)\u003c\/p\u003e\u003cp\u003e• Bolts directly to frame using a total of 8 mounting points\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Integrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp class=\"p1\"\u003e•Four integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003cp\u003e• Integrated license plate mount\u003c\/p\u003e\u003cp\u003e• Integrated turn signal cut outs\u003c\/p\u003e\u003cp\u003e• Optional heavy duty 0.120\" wall grill and headlight tubing for added protection\u003c\/p\u003e\u003cp\u003e•The bumper center section can be ordered on its own by special request if you would like to make your own hybrid tubing side wings (Please email us for details)\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241258780,"sku":"C0104951","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_15c542d6-3f85-4a79-899f-b420c9f80347.jpg?v=1783515133"},{"product_id":"100-series-land-cruiser-high-clearance-front-bumper-kit","title":"100 Series Land Cruiser High Clearance Front Bumper Kit","description":"\u003cp class=\"p1\"\u003eThis is a high clearance DIY weld-together winch bumper kit for the 100 Series Toyota Land Cruiser and Lexus LX470. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Land Cruiser! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 82lbs through careful design work. And unlike many other bumpers on the market, absolutely no modification of the vehicle body or frame is required and the vehicle can be easily returned back to stock if desired!\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  quality 3\/16\" P\u0026amp;O Steel (or 1\/4\" Aluminum). This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. This bumper provides excellent integration of the factory electrical and headlight washer assemblies (LX470 only). The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights, turn signals and your factory headlight sprayers right into the Coastal Offroad bumper using the factory wiring harness and thus maintaining all of the factory switches on your steering column. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the single factory plug located behind the vehicle grill.\u003c\/p\u003e\u003cp\u003eThe recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become.\u003c\/p\u003e\u003cp\u003e•DIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003cp\u003e•NO Drilling, cutting or welding of the actual vehicle required - this bumper can be removed from your 100 Series \/ LX470 without a trace that it was ever installed!\u003c\/p\u003e\u003cp\u003e\u003cb\u003e•IMPORTANT NOTE for Turn Signals\u003c\/b\u003e: The Toyota version of the 100 Series has its factory turn signals in the headlight assembly and thus does not require our replacement turn signals. However, the Lexus LX470 Version has its factory turn signals in the factory bumper and thus requires our replacement turn signals unless you are coming up with your own custom turn signal solution.\u003c\/p\u003e\u003cp\u003e•Laser cut and CNC-bent parts are slotted and tabbed for foolproof fitment. This greatly reduces the amount of assembly, welding, grinding time required by you and makes for a cleaner finished product. The Nitrogen laser cutting technology means no cutting edge oxidation or slag and thus easier and stronger welds\u003c\/p\u003e\u003cp\u003e•Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 3\" from center of grill\u003c\/p\u003e\u003cp\u003e•Heavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp\u003e•Optional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (41lb weight savings)\u003c\/p\u003e\u003cp\u003e•Bolts directly to frame using up to 14 factory mounting points - no drilling required\u003c\/p\u003e\u003cp\u003e• Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003cp\u003e•Reinforced 9\/16\" thick clevis mounts allow the use of ¾” D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003cp\u003e•Four integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003cp\u003e•Optional LED Turn Signals (Only Required for Lexus LX470 Models, as the Toyota 100 Series has its factory signals in the headlight assembly)\u003c\/p\u003e\u003cp\u003e•Includes mounting locations for the factory headlight washer sprayers (LX470 models only)\u003c\/p\u003e\u003cp\u003e•Integrated license plate mount\u003c\/p\u003e\u003cp\u003e•Optional heavy duty grill and headlight tubing hoops for added protection\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241357084,"sku":"CO70018","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_413effbb-64a7-4ed3-aeaf-c81c8b17dd29.jpg?v=1783515613"},{"product_id":"1st-gen-tacoma-closed-top-front-bumper-kit","title":"1st Gen Tacoma Closed Top Front Bumper Kit","description":"\u003cp\u003eThis is our new closed top winch bumper DIY weld-together kit for the 1st generation (1995.5-2004) Toyota Tacoma. This bumper is based on our original open-top winch bumper that is the tightest fitting and highest clearance winch bumper on the market. This bumper is different in that the winch sits entirely enclosed within the bumper, thus eliminating the need to trim your grill to install a winch. We have managed to do this while still keeping a very low profile bumper that only protrudes 4\" from the center of the grill. This high clearance design allows you to forget about approach angles and substantially improves the offroad capability of your Tacoma! It offers excellent protection from trail obstacles, animal strikes and inattentive drivers and has been kept to a weight of 89lbs through careful design work. The main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 1st gen Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 89lbs for the steel bumper and 44lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 4\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (45lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eBolts directly to frame using a total of 8 mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eTwo integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eIntegrated turn signal cut outs \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241488156,"sku":"CO10747","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_4843a0f2-5371-43ff-875c-2eb6a7e29be2.jpg?v=1783513000"},{"product_id":"1st-gen-tacoma-high-clearance-front-bumper-kit","title":"1st Gen Toyota Tacoma High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 1st generation (1995.5-2004) Toyota Tacoma. It features a bolt-on design, protected winch mount, and the best approach angle of any winch bumper on the market. In fact, this bumper protrudes less than 2.5\" from the center of the grill! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 84lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 1st generation (1995.5-2004) Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with two integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma's frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma's frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 84lbs for the steel bumper and 42lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2.5\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (42lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated turn signal cut outs \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241586460,"sku":"CO0924","price":785.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_40bf85b4-4e40-4bfe-8af9-7ead72837d63.jpg?v=1783517149"},{"product_id":"2nd-gen-tacoma-high-clearance-front-plate-bumper-kit","title":"2nd Gen Tacoma High Clearance Front Plate Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 2nd generation (2005-2015) Toyota Tacoma. It features a bolt-on design, protected winch mount, and one of the best approach angles on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 104lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2005-2015) Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 104lbs for the steel bumper and 51lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (53lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241881372,"sku":"CO0919","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_0ee45fb3-17e0-431f-9653-9f15e3b51125.jpg?v=1783513656"},{"product_id":"2nd-gen-tacoma-extreme-clearance-plate-bumper-kit","title":"2nd Gen Tacoma Extreme Clearance Plate Bumper Kit","description":"\u003cp\u003eThis is our new extreme clearance DIY weld-together winch bumper kit for the 2nd generation (2005-2015) Toyota Tacoma. This bumper kit involves cutting off the low-hanging front frame crossmember on the Tacoma and replacing it with our \u003cb\u003eincluded\u003c\/b\u003e heavy duty crossmember. This not only provides a huge strength increase but also gains a whopping 4.5\" of ground clearance at arguably the most important location of the vehicle! We then went and redesigned our full underbody skid plate set to mate up with the supplied frame crossmember. This makes for a seamless package that squeezes every possible inch of ground clearance out of your Tacoma all the way from the bottom of the grill to behind the transfer case. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 98lbs through careful design work.\u003c\/p\u003e\u003cp\u003eWARNING: This is our Extreme Clearance Plate Bumper kit that \u003cstrong\u003erequires cutting and welding your Tacoma's frame\u003c\/strong\u003e. For our bolt-on bumper kit that does not require any permanent vehicle modifications, please see here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-high-clearance-plate-bumper\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-high-clearance-plate-bumper\/\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003eWhile the Toyota Tacoma is one of the best offroad platforms available, the frame does have a few limitations from the factory. At the front of the Tacoma frame, there is a low hanging crossmember that hangs down 4.5\" below the actual main frame rails. There are no engine or radiator components located behind this crossmember, just empty space! By cutting off this low hanging crossmember and welding in our supplied heavy duty crossmember in line with the main frame rails, the front bumper and skid plates can then be mounted 4.5\" higher. This gives a ton of extra clearance and approach angle that will transform the offroad capability of your Tacoma. \u003c\/p\u003e\u003cp\u003eThis bumper still uses the factory frame stud plates to mount to the vehicle, meaning that there is absolutely no guess-work required when mounting the bumper or welding in the supplied crossmember. The factory frame studs will locate the bumper perfectly on the vehicle, and then the supplied crossmember comes pre-cut with holes for three large 1\/2\" bolts. These 1\/2\" bolts tie the winch plate of the bumper directly into our heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. This also relieves stress from the factory frame stud plates, which are known to be a weak point on the Tacoma. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. \u003c\/p\u003e\u003cp\u003ePlease take note that the factory frame crossmember that gets removed serves as the meeting point between nearly all front bumpers and skid plates. This is why we highly recommend running this bumper in combination with our Extreme clearance skid plate set for a seamless front to back protection system for your Tacoma that maximizes the clearance gains. \u003c\/p\u003e\u003cp\u003e\u003cb\u003eEnter the code Extremeclearance10 to get 10% off the bumper and skid plates when ordered together! Those skid plates can be found here\u003c\/b\u003e\u003cstrong\u003e: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\u003c\/a\u003e\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes our heavy duty replacement frame crossmember which also facilitates mounting of our Extreme clearance skid plate set (See skid plate details here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/)\u003c\/a\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExtreme Clearance design gains 4.5\" of ground clearance \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCenter section of the bumper is made from a single CNC-bent panel for a cleaner look and much less welding and grinding \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts to vehicle frame using 6 factory frame studs as well as 3 massive 1\/2\" bolts for trouble-free winching and recovery pulls \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of surface mount lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242012444,"sku":"CO74215","price":964.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_9ee5a6dd-91f8-4d50-b93f-6bda3ff9f7d0.jpg?v=1783513655"},{"product_id":"3rd-gen-tacoma-flat-top-front-bumper-kit","title":"3rd Gen Tacoma Flat Top Front Bumper Kit","description":"\u003cp\u003eThis is a flat top DIY weld-together bumper kit for the 3rd generation 2016-2022 Toyota Tacoma. It features heavy duty recovery points, a protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 102lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 3rd generation 2016-2022 Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 102lbs for the steel bumper and 50lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAvailable with Factory Parking Sensor Cut outs - (Please email us or put a comment in your order notes section to receive this option) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains part of the factory plastic bumper for reduced weight - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (52lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower Steering Cooler Relocation Brackets Included \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242176284,"sku":"CO58135","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_baba01c6-809e-4d07-a0f7-030984540643.jpg?v=1783514095"},{"product_id":"3rd-gen-tacoma-lo-pro-winch-bumper-kit","title":"3rd Gen Tacoma Low Profile Winch Bumper Kit","description":"\u003cp\u003eThis is a low profile DIY weld-together winch bumper kit for the 3rd generation 2016-2022 Toyota Tacoma. This winch bumper is for those looking for full offroad functionality and protection while still keeping a mostly-factory looking front end. It features a bolt-on design, protected winch mount, 9\/16\" thick recovery points and space to mount a 25\" single row light bar. It offers excellent protection from trail obstacles and distracted drivers and has been kept to a weight of 68lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with an integrated 25\" single row LED light bar mount (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma's frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Toyota Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 68lbs for the steel bumper and 33lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is almost zero. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains most of the factory plastic bumper - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (35lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to vehicle frame using a total of 10 factory mounting points - no frame drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e25\" single row light bar mount – slotted mounting tabs give adjustment to fit a variety of light bars \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242241820,"sku":"CO4869","price":641.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_258a4dc8-666b-47a6-913d-c57fdbf0d267.jpg?v=1783517151"},{"product_id":"3rd-gen-tacoma-high-clearance-front-bumper-kit","title":"3rd Gen Tacoma High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 3rd generation 2016-2022 Toyota Tacoma. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, wildlife strikes, and distracted drivers and has been kept to a weight of 102lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 3rd generation (2016-2022) Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Toyota Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), a 20\" single row LED light bar mount, an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Toyota Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 102lbs for the steel bumper and 50lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Toyota Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAvailable with Factory Parking Sensor Cut outs - (Please email us or put a comment in your order notes section to receive this option) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains part of the factory plastic bumper for reduced weight - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (52lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 20\" Single Row LED Light bar cut out - slotted mounting tabs included \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242340124,"sku":"CO4849","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_62185f78-7aa0-4072-9dbd-d996df92f1b3.jpg?v=1783514362"},{"product_id":"3rd-gen-tacoma-extreme-clearance-flat-top-bumper-kit","title":"3rd Gen Tacoma Extreme Clearance Flat Top Bumper Kit","description":"\u003cp\u003eThis is our new extreme clearance DIY weld-together winch bumper kit for the 3rd generation (2016-2022) Toyota Tacoma. This bumper kit involves cutting off the low-hanging front frame crossmember on the Tacoma and replacing it with our \u003cb\u003eincluded\u003c\/b\u003e heavy duty crossmember. This not only provides a huge strength increase but also gains a whopping 4.5\" of ground clearance at arguably the most important location of the vehicle! We then went and redesigned our full underbody skid plate set to mate up with the supplied frame crossmember. This makes for a seamless package that squeezes every possible inch of ground clearance out of your Tacoma all the way from the bottom of the grill to behind the transfer case. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 98lbs through careful design work.\u003c\/p\u003e\u003cp\u003eWARNING: This is our Extreme Clearance Plate Bumper kit that \u003cstrong\u003erequires cutting and welding your Tacoma's frame\u003c\/strong\u003e. For our bolt-on bumper kit that does not require any permanent vehicle modifications, \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/3rd-gen-tacoma-flat-top-front-bumper-kit\/\"\u003eplease see here\u003c\/a\u003e. \u003c\/p\u003e\u003cp\u003eWhile the Toyota Tacoma is one of the best offroad platforms available, the frame does have a few limitations from the factory. At the front of the Tacoma frame, there is a low hanging crossmember that hangs down 4.5\" below the actual main frame rails. There are no engine or radiator components located behind this crossmember, just empty space! By cutting off this low hanging crossmember and welding in our supplied heavy duty crossmember in line with the main frame rails, the front bumper and skid plates can then be mounted 4.5\" higher. This gives a ton of extra clearance and approach angle that will transform the offroad capability of your Tacoma. \u003c\/p\u003e\u003cp\u003eThis bumper still uses the factory frame stud plates to mount to the vehicle, meaning that there is absolutely no guess-work required when mounting the bumper or welding in the supplied crossmember. The factory frame studs will locate the bumper perfectly on the vehicle, and then the supplied crossmember comes pre-cut with holes for three large 1\/2\" bolts. These 1\/2\" bolts tie the winch plate of the bumper directly into our heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. This also relieves stress from the factory frame stud plates, which are known to be a weak point on the Tacoma. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cp\u003ePlease take note that the factory frame crossmember that gets removed serves as the meeting point between nearly all front bumpers and skid plates. This is why we highly recommend running this bumper in combination with our Extreme clearance skid plate set for a seamless front to back protection system for your Tacoma that maximizes the clearance gains. \u003c\/p\u003e\u003cp\u003e\u003cb\u003eEnter the code Extremeclearance10 to get 10% off the bumper and skid plates when ordered together! Those skid plates \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ecan be found here\u003c\/a\u003e.\u003c\/b\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes our heavy duty replacement frame crossmember which also facilitates mounting of our Extreme clearance skid plate set (\u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003eSee skid plate details here\u003c\/a\u003e) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExtreme Clearance design gains 4.5\" of ground clearance \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCenter section of the bumper is made from a single CNC-bent panel for a cleaner look and much less welding and grinding \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts to vehicle frame using 6 factory frame studs as well as 3 massive 1\/2\" bolts for trouble-free winching and recovery pulls \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of surface mount lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242471196,"sku":"CO93305","price":964.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_6d830ad4-b3f0-4b9c-ad47-9bf590675a3a.jpg?v=1783514094"},{"product_id":"3rd-gen-tacoma-extreme-clearance-front-bumper-kit","title":"3rd Gen Tacoma Extreme Clearance Front Bumper Kit","description":"\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis is our new extreme clearance DIY weld-together winch bumper kit for the 3rd generation (2016-2022) Toyota Tacoma. This bumper kit involves cutting off the low-hanging front frame crossmember on the Tacoma and replacing it with our \u003cspan style=\"font-weight: bolder;\"\u003eincluded\u003c\/span\u003e heavy duty crossmember. This not only provides a huge strength increase but also gains a whopping 4.5\" of ground clearance at arguably the most important location of the vehicle! We then went and redesigned our full underbody skid plate set to mate up with the supplied frame crossmember. This makes for a seamless package that squeezes every possible inch of ground clearance out of your Tacoma all the way from the bottom of the grill to behind the transfer case. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 98lbs through careful design work.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWARNING: This is our Extreme Clearance Plate Bumper kit that \u003cspan style=\"font-weight: bolder;\"\u003erequires cutting and welding your Tacoma's frame\u003c\/span\u003e. For our bolt-on bumper kit that does not require any permanent vehicle modifications, \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/3rd-gen-tacoma-flat-top-front-bumper-kit\/\"\u003eplease see here\u003c\/a\u003e.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWhile the Toyota Tacoma is one of the best offroad platforms available, the frame does have a few limitations from the factory. At the front of the Tacoma frame, there is a low hanging crossmember that hangs down 4.5\" below the actual main frame rails. There are no engine or radiator components located behind this crossmember, just empty space! By cutting off this low hanging crossmember and welding in our supplied heavy duty crossmember in line with the main frame rails, the front bumper and skid plates can then be mounted 4.5\" higher. This gives a ton of extra clearance and approach angle that will transform the offroad capability of your Tacoma.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis bumper still uses the factory frame stud plates to mount to the vehicle, meaning that there is absolutely no guess-work required when mounting the bumper or welding in the supplied crossmember. The factory frame studs will locate the bumper perfectly on the vehicle, and then the supplied crossmember comes pre-cut with holes for three large 1\/2\" bolts. These 1\/2\" bolts tie the winch plate of the bumper directly into our heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. This also relieves stress from the factory frame stud plates, which are known to be a weak point on the Tacoma.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003ePlease take note that the factory frame crossmember that gets removed serves as the meeting point between nearly all front bumpers and skid plates. This is why we highly recommend running this bumper in combination with our Extreme clearance skid plate set for a seamless front to back protection system for your Tacoma that maximizes the clearance gains.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cspan style=\"font-weight: bolder;\"\u003eEnter the code Extremeclearance10 to get 10% off the bumper and skid plates when ordered together! Those skid plates \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ecan be found here\u003c\/a\u003e.\u003c\/span\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes our heavy duty replacement frame crossmember which also facilitates mounting of our Extreme clearance skid plate set (\u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003eSee skid plate details here\u003c\/a\u003e)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExtreme Clearance design gains 4.5\" of ground clearance\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCenter section of the bumper is made from a single CNC-bent panel for a cleaner look and much less welding and grinding\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts to vehicle frame using 6 factory frame studs as well as 3 massive 1\/2\" bolts for trouble-free winching and recovery pulls\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of surface mount lights\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242503964,"sku":"CO12975","price":964.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_62213d07-8102-430e-ace7-dd89604406bc.jpg?v=1783516718"},{"product_id":"1st-gen-tundra-high-clearance-front-bumper-kit","title":"1st Gen Tundra High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 1st generation (2000-2006) Toyota Tundra. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Toyota. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 108lbs (steel version) through careful design work. And unlike many other bumpers on the market, no modification of the vehicle body or frame is required and the vehicle can be easily returned back to stock if desired. The bumper uses a total of 12 factory mounting points to solidly bolt this bumper to your frame. While 12 mounting points is certainly overkill, it ensures that winch and impact forces are evenly distributed into your Tundra's frame. The main section of this bumper is CNC-bent out of a single piece of  quality 3\/16\" P\u0026amp;O Steel (or 1\/4\" aluminum). This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  quality 3\/16\" P\u0026amp;O Steel (or 1\/4\" Aluminum). This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. The high clearance design makes your Tundra look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference! The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLaser cut and CNC-bent parts are slotted and tabbed for foolproof fitment. This greatly reduces the amount of assembly, welding, grinding time required by you and makes for a cleaner finished product. The Nitrogen laser cutting technology means no cutting edge oxidation or slag and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - the entire bumper protrudes less than 3\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (55lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 3\/8\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242536732,"sku":"CO65556","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_7724f7b2-78cb-435c-a409-640f18e06760.jpg?v=1783513001"},{"product_id":"2nd-gen-tundra-high-clearance-front-bumper-kit","title":"2nd Gen Tundra High Clearance Front Bumper Kit","description":"\u003cdiv\u003e\n\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 2007-2013 2nd Gen Toyota Tundra. It features a bolt-on design, protected winch mount, and the best approach angle of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tundra! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 114lbs (steel version) through careful design work. And unlike many other bumpers on the market, absolutely no modification of the vehicle body or frame is required and the vehicle can be easily returned back to stock if desired. \u003c\/p\u003e\n\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  quality 3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. This bumper provides excellent integration of the factory fog light wiring and parking sensor assemblies. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness and thus maintaining all of the factory switches on your steering column. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle is required - this bumper can be installed and removed from your Tundra without a trace that it was ever there! (For Tundra models with the factory 1-piece plastic bumper, trimming of this factory plastic bumper is required) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower Steering Cooler Relocation Brackets Included (Requires draining PS Fluid. detailed instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 2\" from center of grill \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits most 12,000lb models) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of ¾” D-Rings \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 30\" Light bar mount - fits all standard 30\" single row light bars and includes adjustable mounts \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional cut outs to easily swap your factory parking sensors into this new bumper \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing hoops for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242864412,"sku":"CO86689","price":927.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_db654c66-fc81-42c0-9a9a-f83b62b39603.jpg?v=1783513658"},{"product_id":"1st-gen-sequoia-high-clearance-front-bumper-kit","title":"1st Gen Sequoia High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 1st generation (2000-2007) Toyota Sequoia. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Toyota. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 108lbs (steel version) through careful design work. And unlike many other bumpers on the market, no modification of the vehicle body or frame is required and the vehicle can be easily returned back to stock if desired. The bumper uses a total of 12 factory mounting points to solidly bolt this bumper to your frame. While 12 mounting points is certainly overkill, it ensures that winch and impact forces are evenly distributed into your Sequoia's frame.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  quality 3\/16\" P\u0026amp;O Steel (or 1\/4\" Aluminum). This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. The high clearance design makes your Sequoia look more aggressive by showing off your front suspension and tires. In addition, this bumper frees up a ton of space in your front wheel wells and allows you to run 37\" tires without any bumper interference! The recovery points are recessed into the bumper and placed as close as possible to the front of each frame rail. This directs pulling forces into the frame and eliminates the leveraging effect that traditional recovery points can put on the bumper and frame due to how far away they are from the frame. The way that our recovery points are situated makes them much stronger than their thickness may suggest. And since they are recessed, they eliminate the catching points that traditional recovery lugs can become. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLaser cut and CNC-bent parts are slotted and tabbed for foolproof fitment. This greatly reduces the amount of assembly, welding, grinding time required by you and makes for a cleaner finished product. The Nitrogen laser cutting technology means no cutting edge oxidation or slag and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - the entire bumper protrudes less than 3\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2005-2007 Version includes upper plates to fill the gap under the grill left by removing the factory plastic bumper \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (55lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 3\/8\" thick clevis mounts maximize clearance and allow the use of ¾” D-Rings for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264243257628,"sku":"CO62688","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_3fb7a4a8-7edb-4049-993d-dbfcf6573a85.jpg?v=1783512999"},{"product_id":"2nd-gen-sequoia-high-clearance-front-bumper-kit","title":"2nd Gen Sequoia High Clearance Front Bumper Kit","description":"\u003cdiv\u003e\n\u003cp\u003e(Bumper shown on Tundra front end. Sequoia pictures coming soon!)This is a high clearance DIY weld-together winch bumper kit for the 2008-2021 2nd Gen Toyota Sequoia. It features a bolt-on design, protected winch mount, and the best approach angle of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Sequoia! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 114lbs (steel version) through careful design work. And unlike many other bumpers on the market, absolutely no modification of the vehicle body or frame is required and the vehicle can be easily returned back to stock if desired. \u003c\/p\u003e\n\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  quality 3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. This bumper provides excellent integration of the factory fog light wiring and parking sensor assemblies. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness and thus maintaining all of the factory switches on your steering column. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFor Sequoia models with the factory 1-piece plastic bumper, trimming of this factory plastic bumper is required. However, NO Drilling, cutting or welding of the actual vehicle frame is required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower Steering Cooler Relocation Brackets Included (Requires draining PS Fluid. detailed instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - bumper protrudes less than 2\" from center of grill \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (58lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using 12 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all 8000-10,000lb winches with removable solenoids (Also fits most 12,000lb models) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of ¾” D-Rings \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 30\" Light bar mount - fits all standard 30\" single row light bars and includes adjustable mounts \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional cut outs to easily swap your factory parking sensors into this new bumper \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing hoops for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264243323164,"sku":"CO87050","price":927.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_2ec45d28-464b-47c4-a7f4-0dfd9eddbd69.jpg?v=1783513655"},{"product_id":"2014-2024-5th-gen-4runner-front-bumper-kit","title":"2014-2024 5th Gen 4Runner Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 5th generation 2014-2022 Toyota 4Runner. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your 4Runner. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 124lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2014-2022 5th generation Toyota 4Runner as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Toyota 4Runner owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota 4Runner frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Toyota 4Runner frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota 4Runner frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 124lbs for the steel bumper and 61lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Toyota 4Runner is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAvailable with Factory Parking Sensor Cut outs - (Please email us or put a comment in your order notes section to receive this option) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2.5\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains part of the factory plastic bumper for reduced weight - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (63lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264243355932,"sku":"CO26929","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_ca5bd802-ce3b-4879-9219-9408be616b7b.jpg?v=1783513450"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/collections\/3.3.webp?v=1787062098","url":"https:\/\/shop-ca.dev-everfruitdigital.com\/collections\/front-bumper.oembed","provider":"Coastal Offroad","version":"1.0","type":"link"}